Stromberg Carlson EXT-3542 Extend-A-Shower, White

Product Information

When you install the rod, the best way is to do it with the curtains on place, so are able to install them as close as posible to the floor without touching. Grand Design, Reflection, Solitude, Transcend, Imagine, and Momentum are registered trademarks of Grand Design RV, LLC. It is a bit thin so it will flex a little if push downwards but anyway this is not meant to hold much weight, just a normal shower curtain. Tip: If your brackets are really big, hold the bracket over the mark that you make and trace the bottom with your pencil or marker.

Made from durable stainless steel, this pole is lightweight, and will hold your curtains up beautifully while also blending in with your existing bathroom decor. These types of rods can be kind of awkward to install since you need to balance the rod while you’re turning the brackets into place. If you ever need to adjust the location or length of your shower rod, turn the smaller portion 3-5 times to loosen it a little and simply move it. The curtains are held in place with a rod and of course the obvious solution would be lower the rod. And he wanted to solve everything that's wrong about the bathing experience: the cling, the rings, the leaks, the yuck, the single-use plastic waste.If your bracket is adhesive, clean the wall before peeling the back off and pressing it into your tile or wall. Hang your shower curtains and protect your floor from unwanted wetness with this easy to fit Chrome Extendable Shower Rod. I made a "frame" out of 2" X 4" lumber and used a metal cutting chop saw until I got the correct sizes that I posted. There are curved mounting rods that you can get if you have a curved tub or want some extra elbow room.

I took a long hard look at my TB sliding shower door last night after 18 months of never even considering the notion that mold could grow there but saw no signs of that at all. If they are, run a level from one bracket to the other and check the bubble in the middle to see if the brackets are even. Agree with the above post; there's more information on this system, including photos, under another post. We are based in Traverse City, Michigan, but our products are available nationwide through our trusted RV dealer network. You can tell when it’s level by looking at the pads on either end to see if they’re both flush with the wall.Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. We direct the A/C vent in our 2015 Unity TB, which is just outside the shower door, into the shower area to help dry things out. They rely on the tension of your shower’s walls to remain stable and can be easily adjusted or moved. If one of your brackets has an opening, it must face up so that your shower rod can rest on the bottom of it. However, we are renting and we've talked with the company owning the building and told us that there is no posible.