NEEWER Pro 100% Stainless Steel Heavy Duty C Stand with Boom Arm, Max Height 10.5ft/320cm Photography Light Stand with 4.2ft/128cm Holding Arm, 2 Grip Head for Studio Monolight, Softbox, Reflector

Product Information

Since a stand is used to hold a piece of gear high above or far off to the side, the base of the stand must be weighed down, commonly with shotbags, sometimes with sandbags. The bag is slung over the top of the tall stand leg so the weight is fully on the stand and not the ground. [4] [5] Types [ edit ] This 161cm Studio C-Stand Stainless has three nested legs with varying leg heights, which enables you to position multiple c-stands really close together in a way that is not possible with regular light stands. The legs also fold flat for storage and transportation. You can use this arm for your overhead shooting with smaller cameras. Again, you have to counterweigh it when doing so. I highly urge you NOT to rig any of the bigger pro DSLR’s this way. They are just too heavy. 4. The Legs

In film production, a C-stand (or Century stand) [1] [2] is primarily used to position light modifiers, such as silks, nets, or flags, in front of light sources. [3] The stand is constructed of metal and consists of a collapsible base, two riser columns, and a baby pin on top. In addition, a C-stand typically includes a gobo head and a gobo arm, also known as a grip head and grip arm, [4] which provide the ability to articulate a light modifier without moving the stand itself. The legs of C stands are designed to be nested, so many stands can be placed around a light source. I really can’t find any information about where the name came from. I was told by an instructor of mine in school that it was a brand name, Century. But I can’t find any info on that either. There are several brands that make C Stands. I have a wild assortment of these that I’ve collected over 30 years made by all kinds of different companies. Matthews Studio Equipment (2022-07-26). "20" C+Stand w/Spring Loaded Turtle Base, includes Grip Head & Arm". matthewsgrip . Retrieved 2019-11-06.Matthews Studio Equipment (2022-07-26). "20" C+STAND W/SPRING LOADED TURTLE BASE, INCLUDES GRIP HEAD & ARM". Matthews Studio Equipment . Retrieved 2022-07-26.

There are 100’s of items that are made that can attach to a C Stand arm. There aren’t a lot of ways to attach a camera, because of what I mentioned above. However, I keep seeing tons of bloggers telling people this is THE way to do an overhead shot and many of them are not using the C-stand properly for their camera. So this post is to show you how to do it properly if you really want to use this method. Matthews Studio Equipment (2022-07-26). "BABY STANDS". Matthews Studio Equipment . Retrieved 2022-07-26.

There are several different kinds of legs. Some are spring loaded, which can be very nice. Others, like the ones pictured above, can slide up the riser column, which can be handy for rigging in precarious situations.