Zenith Industries ZN700001 Trim Puller

Product Information

And then there are jobs that need a little bit of both. The removal of interior cosmetic parts is a perfect example. Most door panels will pop off with the right amount of elbow grease, but do it the wrong way — or with the wrong tool — and you’ll end up scratching the panel or worse. I mean, you could use a trim puller/baseboard removal tool, and I’ve listed a great one below. But, unless you’re going to be removing a LOT of baseboards, you can definitely do this project with common tools most homeowners have on hand. Tools you need to remove baseboards

You don’t like them. This means you probably don’t care how they come off the wall, pieces would probably make you happy! But then, your wall would be a mess, so you still need to be careful. Now that you’ve cleaned up both the wall and the baseboard you removed, you are ready to install them again. You can simply cut in with a paintbrush or use painter’s tape to mask off the trim. The Easiest Way to Remove Baseboards and Other Trim – Step-by-Step PROTECTIVE - Wide 15° bevelled edge allows puller to easily separate plasterboard or skirting from the wall without any damage to materials being removed. TIP: The Trim Puller is designed to rotate left or right to remove trim, not up and down, like a pry bar.Zenith by Danco exemplifies an innovative line of Pro & DIY demolition, restoration and remodeling tools that empowers you to achieve remodel and install effectively without damaging walls, floors and cabinets like normal pry bar tools. SIDE NOTE: You might have quarter rounds or shoe molding that need this done too. If you are wondering what a quarter round or shoe mold is Bob Vila has a full article all about them . You don’t need to remove baseboards or trim for every project (like painting), but there are two reasons you might need to:

Use the putty knife to carefully and slowly scrape the wall where the caulking was previously located. This 10-in-1 vehicle trim removal tool is suitable for the following tasks: moulding trim and badge remover, windscreen wiper wrench, door rubber – metal clip insert, door weather strip remover, door trim – Bezel clip remover, door handle clip remover, headlamp spring clip tool, windscreen moulding clip remover, door rubber – plastic clip remover, serrated edge to clean up panel seam.Thomas Regional® are part of Thomasnet.com. Thomasnet Is A Registered Trademark Of Thomas Publishing If any caulking stubbornly remains, use your utility knife to carefully cut it off the wall. It helps to keep the knife as parallel to the wall as possible for this step, so you are not cutting into the drywall. But if you’re renovating your home and you are installing new carpet or laminate, you will likely want to remove the baseboards first.

The Trim Puller Mini is the smaller version of the innovative and revolutionary tool, Trim Puller pry bar tool, designed to make trim removal faster and more efficient without damaging your trim or walls Perfect for removing baseboard trim, crown molding, chair railings, door casings and decorative wall panels without damage The bar is strong; it didn’t flex a bit when removing even the most stubborn boards,” wrote a reviewer who was working with rotting boards. “Even better, it has nail-pulling holes which allows you to easily remove the nails left behind as you go.” Of course, if you don’t want to buy a new tool, you can remove baseboards with a putty knife, pry bar, and hammer (we’ve done that!) but this tool is inexpensive and will save you a lot of frustration. Why would you need to remove baseboards?SIDE NOTE: If you hit a nail or your trim is smaller than the puller, stop hammering and continue to the next part of this step. Next, you can either use a putty knife or flat razor blade to slowly scrape the wall where the caulk was previously placed along the trim. This extra step will give you a smooth surface to work with when you’re ready to reinstall the baseboard. PRACTICAL - For the swift removal of skirting boards, mouldings and flooring with ease and minimal damage. You don’t necessarily need to remove baseboard or other floor trim for all home DIY projects. So, which projects do you need to remove it for and which do you not? Installing New Floors – Yes, Remove At Milwaukee®, Heavy Duty is more than just a slogan. It is a promise to offer the best to professional users.