Joined in 2023 
82 
63 About this deal
Saw Guide– One of the other common functions of the speed square is as a guide for cross-cutting lumber at an accurate 90° or 45° angle. By firmly holding the fence against the edge of a board, you can use the other right-angle or 45° angle edge as a fence for your hand or circular saw.
Other Cool Features– The Swanson Speed Square has a patented feature — the diamond cut, a diamond-shaped cut-out on the ruler edge of the tool. This is used for squaring on a line scribed across the board so that you can then make a perfect 90° line from your scribed angled to the edge of the board. To gain the best performance and use from your speed squares, you must understand what each marking represents and exactly what speed squares are used for. On the first side of speed squares, you will see markings measuring inches, similar to a ruler. On the second side, you will see a raised edge or a lipped fence. Finally, on the third side, which is the longest side of speed squares, you will see degree markings, which is the side you use with a miter saw. Next, a good speed square will include high contrast and high visibility markings. You will use a speed square in different lighting conditions, so it should be easy to read in different scenarios.Reviewers appreciate that this speed square is laser engraved, making the markings durable. One customer wrote “I really like the fine etching on this, as the smaller your measurements are, the more precise your work, and less chances of inaccuracy and problems down the road.” Others like the lightness of the aluminum. Another customer summed up with “I highly recommend this product to all trades in the industry.” Protracting– To use the protractor feature, you first find the Pivot point marked in the 90° corner of the square. With the Pivot mark on the factory edge of your board, you pivot the bottom of the tool (where the protractor degrees are marked) and move it to the desired degree (let’s say 45°) on the same factory edge. The pivoting edge of your square is now at a 45° angle to the factory edge. Mark that angle and you’re ready to cut. For anyone who is on a limited project budget, the Hyper Tough Framing Rafter Squareis a solid option that will barely make a dent in your overhead. This speed square can also be used as a protractor and tri-meter. It can find both angle and pitch, as well as squaring up lumber. The embossed markings are fade-proof, and included on both sides, making it convenient for both left- and right-handed use.
Speed squares can be used to measure the pitch of a roof and to lay out angles from 0 degrees to 90 degrees. Features offered
Did You Know?
The term "speed square" is a genericised trademark based on those owned by Swanson Tool Company [1] [2] which first manufactured and sold the tool. Framing squares are used by carpenters, metalworkers, engineers, hobbyists, DIYers and roofers. Conclusion Membership connects and supports the people and projects that shape our future and supports the learning
The diamond presented on a speed square can be used so that you can mark a birdsmouth or a notch. The diamond can also be used proficiently during rafter work. Expert Tip The term “Speed Square” is trademarked by Swanson Tool Co., Inc. but is commonly used as a generic name.
If it is level, the string will rest on the 45-degree mark. If not, you’ll know precisely how unlevel the item is. The Empire Laser Etched Aluminum Rafter Squarecomes in a bright shade of blue, with high visibility permanent laser engraved markings. The extruded aluminum body is more sturdy than die-cast, and it won’t corrode or rust. The rafter square has convenient conversion tables, and precision scribe notches help guide the pencil when marking. The heel is 15% wider than average for a steady hold on material.
Great Deal 
New Comment