MICROJIG Matchfit DVC-1177K2 Dovetail Clamp Pro, Green/Yellow/Silver

Product Information

The PV rating (Peak To Valley) is a measurement from the highest point (Peak) to the lowest point (Valley). It fits all the major brands that other aftermarket track clamps fit, but unlike other clamps, ours has the AP Spring that keeps the clamp arm where you set it during use. Once the measurement has been taken, we are provided with a series of results that show the optical quality of the surface plus other information. You can also install more weights to each other simply by screwing them to each other through the screws supplied as standard. was looking at a t slot cutting router bit, but the depth needed would be too deep - planing on usual 3/4 material, and these need more to have enough timber above the slot to hold a regular track clamp.

As a brand beloved by professionals and hobbyists alike, we’re proud to continue pushing the boundaries of what’s possible in woodworking.The kit comes with two brackets (I also bought two more - the ones with the dual direction force bases) and a separate straight bit. Baader” instruments and telescope accessories are well known by knowledgeable amateurs and in many schools. The dovetail clamps provide the connection to telescopes support plates and are useful to create support instruments like side-by-side plates (to support two telescopes in parallel on the same mount) or to allow the precise positioning of the guide rings (to adjust precisely the weight balance). Very flexible and adds function to the working surface, as you’re not restricted to fixed positions.

Because the clamp pressure is normally directly over the clamp head in the groove, the groove is supported and the board does not tear out. This is a cheaper and much quicker alternative, and you can easily put dovetail slots in any wooden surface you need to clamp to. The positive lock of the ratchet mechanism resists loosening even under heavy vibration such as grinding or routing. More than 15,000 Baader planetariums (the company’s first patented product) help students around the world to understand astronomical relationships.This dovetail clamp has been designed for the ASIAIR PRO to connect it to your telescope's Vixen-style dovetail bar, so that the ASIAIR PRO will be hanged down from the bar. The big dovetail clamp Vixen+Losmandy PLUS for AZ-EQ5 allow to install on the Skywatcher AZ-EQ5 mount telescopes with Vixen and Losmandy type dovetail bars. Again, these are measured by the interferometer when we take measurements of the optical surface after adjustment. Universal dovetail clamp suitable for all optical tubes which are equipped with a standard 44mm dovetail rail (Messier/ES/GP/Vixen). With any standard 1/2” 14-degree dovetail router bit, you can create your own tracks, eliminating the need for expensive aluminum tracks.