White Plastic 2 Gang Intermediate Light Rocker Switch Curved Edge | Clean Pure White Light Switch with Screw Covers for Screwless effect | Home Improvements, Update Sockets

Product Information

The rules on what you can and cannot do to the electrics in your home are extremely strict, however when it comes to changing light switch faceplates and a few others, you are allowed to do this without the assistance of a qualified electrician.

It is also possible to install or fit a variation on this theme by combining dimmer and "throw" switches on the same plate. You are then able to set the light to the required ambiance and turn it on and off. The ambiance setting is remembered by the switch but can be altered just like any other dimmer. Way Switches: A ‘2 way’ switch means there is another switch controlling the same light. These are often used on a stair case, large room with switches by each door Gangs and ways are the terms used to describe light switch connections. They tell you how many light fittings the switch can control and how many other switches control the same light. Here’s an explanation. As mentioned above, you also need 2-way light switches on the end of a circuit that has intermediate switches in the middle. A Summary of What to Use and WhenHowever, if you need two switches to control a single lighting circuit, in the same manner that you would have a switch at both the top and bottom of a staircase to control a landing/stairway light, you need to use what’s known as a 2 ‘way’ switch. Don’t take any chances; if you don’t understand the job from start to finish then don’t attempt it, it’s that simple! If you are wanting to add new lights and light switches to an existing circuit or the similar then this is not possible, this will need to be done by a registered Part P electrician.

If you have a dimmer switch they are described in the same way; a 1 gang dimmer switch will have a single dimmer on the plate, and a 2 gang dimmer switch will have 2 dimmers and so on. The most common light switches are white plastic. But there’s a wide range of other, more decorative colours and finishes available, so homeowners can match their switches to their décor. A ceiling switch is mounted to the roof and is switched on and off using a pull cord – see our project on how to fit a pull cord switch. This prevents any water or moisture coming anywhere near any electrical source. When working on or around electricity, make sure that the power is off and the circuit that you are working has been isolated. If you have any doubts at any time then you should consult a professional. On the whole 2 or 3 gang switches will always be 2 way switches. If you are buying switches and don’t know exactly what you need then it is often a good idea to get a 2 way switch anyway.With this in mind, this DIY project looks at the different types of light switch and what each should be used for. Rules and Regulations for Electrical Work Three or two way light switch wiring may be more complicated. A like-for-like replacement should be easy for a competent DIYer. However, caution should be taken when working on multi-way switches. The lights they control should be connected to the same circuit, but there may be live cables on another switch if they're wired incorrectly. The main difference between an intermediate switch and a two way switch is the way they can be used in combination with other switches. When there are more than two switches on one lighting circuit, you need one of those switches to be an intermediate switch. When to Use Intermediate Switches Switches also come with different profiles, describing how the switch stands out from the wall. For example, raised profiles with rounded or square edges stand a few millimetres out from the wall. There are slim raised profiles that stand out less. And there are flat profiles that are almost flush with the wall.