Lian-Li O11 AIR MINI Black SPCC/Aluminum/Tempered Glass ATX Mini Tower Computer Case - O11AMX

Product Information

Small tower with big airflow, the O11 AIR MINI provides modular design for ATX, M-ATX or ITX motherboards. Being all about the air, O11 AIR MINI has a spacious interior to accommodate multiple confirgurations of fan and radiator setups to maximize the airflow. Optimized Dust Management The mesh panels of O11 Air Mini are designed as dust filters and intake sufficient air into the chassis. My only real complaint about the O11 Air Mini came after assembly: my 3.5" Hard Disk Drives were running hot and noisy. The included thin rubber drive grommets do very little to damp vibration. I was able to fit larger and softer silicone grommets on the side mount, and placing my 7200rpm drive on these made it a lot quieter. These larger grommets cannot be used on the rear trays as there is not enough clearance for them to slide in after mounting. The close mounting to the trays also restricts airflow, which brings me to the next problem. Entre cosas más positivas, la gestión de cables es súper fácil y no queda fea. Me gusta que tiene una bahía para discos duros que suelo usar para guardar mis ssds externos jaja ya que se accede desde el exterior, no hay que quitar la tapa. Great case, enabling a very powerful system to be installed in a form factor that doesn't take over your desk.

When set to the 3 slot configuration a full size GPU and Mini-ITX motherboard can be installed. Additional large radiators can be mounted above and below the motherboard. TEMPERATURE OTTIME, la circolazione dell'aria è OTTIMA, nel vecchio case avevo un castom liquid, ho deciso di mettere in questo nuovo case un AK620. le temperature della cpu sono quasi identiche. visto che l'aria in espulsione è molto vicina al dissipatore. Dual Chamber Design for Cable Management The dual-chamber design behind the motherboard tray made cable management a simple job.By now, you’ve probably gathered that the O11D Mini and the new O11 Air Mini are almost entirely different cases. They’re based on the same base principles, but externally and internally they are surprisingly different. The 7 Slot Mode has space for up to ATX motherboards. This mode will reduce radiator support – removing support for a top radiator when using any size motherboard. When using an ATX motherboard, the bottom radiator can only be 240mm, but with ITX and M-ATX you can install up to a 280mm radiator. I would recommend this to anyone who wants a sleek look, while still being able to cram loads of components and cooling into their case.

Regarding liquid cooling, the levels of radiator support that this case offers varies depending on your chosen hardware configuration. We will discuss this further later in this review. The VGA-Vertical Top Mode gives more clearance for fan installation in the bottom, with 60mm total clearance. With an ATX motherboard only 240mm radiators can be installed in the bottom. Clearance for High-Performance CPU Cooler and ATX PSU Although O11 Air Mini is a compact case, it provides up to 167mm height CPU clearance, allowing users to mount their performance CPU cooler in the system. I absolutely love the this case to death after finally being able to build in a o11 based cased i have wanted to get forever and settled on the air mini since i have zero interest in custom water cooling and radiators which to me is a massive waste of time, money and hassle if anything breaks or leaks so i got this case solely for a Air cooled build and i love it so much i find my self just staring at how nice and tiny it is. Swapped all my parts out of a much larger and longer fractal meshify 2 since it took up to much desk space and was mostly empty so i love how compact and clean everything looks in a smaller case and my temps are far far better than what they were in a larger case with the ability to add more fans for airflow and im very surprised i was able to fit my large eatx motherboard in this with basically no real issues so you can in fact fit eatx up to a certain length as they mentioned and have it not affect your cable routing etc. in questo lian li 011 AIR MINI, se si hanno i cavi cablati si ha qualche problema con il cave-management , quindi bisogna trovare un compromesso.

Account

Lian Li O11 Air Mini supports a motherboard up to E-ATX, however it is much more interesting when you work with a smaller Micro-ATX as that allows you to open up the top of the case for cooling hardware. When I first received the O11 Air Mini, I didn’t think I would like it. After all, the standard O11D Air wasn’t as popular as the PC-O11 Dynamic, the company ditched the pretty glass panel, and often, included case fans just aren’t all that good. But this couldn’t be further from the truth with the O11 Air Mini. I like the look of its front mesh panel more than glass, and it performs a smidge better. The included fans are actually reasonably good, and the case has a more practical interior with support for ATX power supplies, instead of being limited to SFX-only. This is my second Lian Li case, the first being a PC-65 that is twenty years its senior. Building into the O11 Air Mini and simultaneously rebuilding into the PC-65 with my old components made for an interesting comparison. In its full 7 slot configuration installing an ATX motherboard is possible.Fans can be mounted to the roof and there is space beside the motherboard to attach a radiator as well as a second radiator to the bottom of the case.