Outdoor Wheelchair Ramps, Wooden Light Threshold Ramps Home Use Portable Triangle Pad Outdoor Step Kerb Ramps Height: 6CM Kerb Ramps (Size : 60 * 10 * 6CM)

Product Information

Independence: One of the top reasons that people choose to install a wheelchair ramp is to regain their independence at home. A person’s independence becomes limited when they no longer feel comfortable maneuvering steps. Handicap ramps can make entering and leaving a home easy and safe, and can help overcome trip hazards like the threshold of sliding glass doors or that one step between a kitchen and living area. Once it looks good enough, use your power drill to drill holes in the plywood and the support beams so you can screw them together. These DIY wheelchair ramps are cost effective as a permanent or temporary solution for patients going through a rehab program. Another thing you should look at on the plans are the fascia boards. They’re the boards along the side that define the side of the wheelchair ramp. If you look at the top view, you can see that the fascia boards extend in a continuous line. In this case, that’s the side of the ramp, and it meshes nicely with the fascia board on the landing. It just wraps around. The fascia boards create a nice final edge, and the way the framing is structured it is a continuous run from the side of the ramp here to the side of the landing.

To determine the horizontal projection of the ramp from the threshold, multiply the rise by the desired slope (12, 16 or 20 from the example above) and divide the result by 12 to convert to feet. For instance, a 30-inch rise multiplied by a 1:16 slope equals 480 inches, which divided by 12 equals 40 feet - the ramp's horizontal extension from the threshold. As mentioned, the ideal running slope should be in a ratio of 1:12 maximum. The cross slope should not exceed 1: 48 along the accessible ramp’s length. 2. Clear WidthEdge Protection: Install edge protection on both sides of the ramp to prevent wheelchair wheels from accidentally rolling off the edge. Preparing the platform is the first and most important step to complete before you can successfully make a wheelchair ramp. Your ramp will be made of pressure-treated wood and led together with galvanized roofing nails.

Choosing between a new, used, or rental wheelchair ramp will depend on your mobility needs and unique situation. If you are not on a strict budget and will need the ramp for more than a year, then new is the way to go. A new wheelchair ramp will not only look better, it also offers a more robust warranty. UsedAccording to an AARP survey, 90% of seniors prefer to remain at home as they age rather than moving to an assisted living facility. However, aging, injuries, and illnesses can make it difficult and unsafe to navigate raised entry ways or stairs at the main entrance to a home. A wheelchair ramp can provide a convenient way to access your home and allow you to remain in the home you know and love. And as the overall American population continues to age, handicap ramps are becoming more popular – making them widely available at affordable prices, especially when comparing the monthly cost of assisted living facilities or retirement homes. Building a wheelchair ramp, whether it may be a smaller threshold ramp or a longer ramp overcoming multiple steps, understandably can seem like a daunting task for even the handiest of individuals. From the novice to the experienced handyman, this is your guide to set you on the right path to not just building a wheelchair ramp, but to building a more accessible, equitable environment for your loved ones. Attaching the ramps is simple and requires no modifications to the step or interior of the building. Please comment below if you have ever had to improve your home’s accessibility by building a wooden ramp. You also want to ensure no large gaps between the ramp and the ground or landing, as they can affect the wheels’ smooth transition. 2. Calculate the Ramp Length

Another thing to pay attention to now is railing design. The support posts for the railings extend right down to the foundation, either the top of the concrete pier or all the way down into the ground. And these continuous posts are important for a solid railing. The design here has two horizontal members. There’s the top handrail, and many ramps just call it a day there without anything extra. But having the mid-rail makes things safer. It’s not like there’s a whole lot of danger of anyone going through that handrail, but why take the chance? For an extra few lengths of 2×4 applied to the outside of the posts, you’ve got a better looking and safer ramp. Once the support beam has been installed on the top of the frame, you can add the plywood board to finish your ramp. 5. Add The Plywood Surface This means that for every one inch of vertical rise, you will have a 12-foot ramp length. So if your porch is 20 inches high, you will need 20 feet of ramp.Run height is capped at 30 inches minimum. You can, however, have several runs on the ramp as there’s no limit. 4. Landings That is one inch of vertical rise for every 12 inches of horizontal length. If the 1:12 ratio is too steep for some people to use, the ADA recommends a lower slope of 1:16 to 1:20.