EASYJOINT Paving COMP Black 12.5K

Product Information

In dry conditions and warm temperatures and humidity, EASYJoint should be firm enough to walk on within 24 hours and will cure hard within a few days.

Smooth the joints: when drained and dried, lightly "point" or "strike" the joints with a suitable finishing toolDriveway Jointing Mortar - High Strength Epoxy Resin Paving Grout - suitable for vehicle areas up 3.5 tonnes Wet the Paving. Thoroughly soak the patio or paved area to be jointed with lots of water using a hose. The paving must be absolutely saturated before starting and remain soaked throughout the application process ‘the wetter, the better.’ We strongly recommend not shortcutting this process, particularly when working with absorbent or sensitive materials such as Sandstone, Granite and Limestone. Highly absorbent and porous stone will require sealing, 2-3 days prior to laying, on its top surface and four edges. To further aid this, "point" or "strike" the joint; do not leave it textured. This ensures the top of the filler is below the top rounded edge of the paving and helps it adhere to the base and sides of the paving material. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes EASYJoint can be installed dry, however to use this method the paving must be sealed at least 2 - 3 days before the EASYJoint application. The paving slabs must be sealed on five sides (the top and four edges). When applying dry, EASYJoint compound must be compressed, by striking off with a pointing tool into the joints as it will not self-compact in the same way it does when applied with water.

EASYJoint is available in a selection of 5 colours which is one of it's main selling points. Whatever your project, there is a colour suitable for it. Joint-IT has comparable colours, but only in 3 out of 5 colours. It's important to note that the two products aren't interchangeable, so if you've already started a project with one, you can't simply switch to the other, but the colours are a very similar with 3 of the ranges.

EASYJoint Select retains the sweep-in application method that made EASYJoint Original so popular, making it EASY to use and faster than traditional methods. Wet the paving, brush in the compound, then strike the joints for a perfect, professional finish every time. The 'Neutral' colour option within the Joint-IT range is almost identical. It has the same pale shades and colours suitable for both dark and light pavers.

Eco-Friendly - the product contains natural ingredients found in nature, such as plant oils and extracts. Top Up Low Spots. Use more EASY Joint to top up any low spots in your joints, repeating the washing process as described previously. Are you looking for a sweep-in jointing compound or patio grout but not sure of the best product for you? In this blog post we look at both EasyJoint and Joint-IT colours. These are two of the highest selling jointing compounds on the market. In this blog we compare both products so you can see which one is the best product for your needs. What are Jointing Compounds?Yes, theoretically EASYJoint can be used below 3 degrees down to freezing conditions, however in these conditions, the use of lots of water becomes more difficult with a greater risk of staining. Where possible avoid using below 3 degrees, use with caution. Does EASYJoint stain paving slabs? Overall EASYJoint seems like a good option. It works exactly like it says on the tin and with proper application, there is very little that can go wrong. However, there does seem to be a small issue with production where around 10-20% of the tubs have already set before being opened. Joint-IT Both the EASYJoint and Joint-IT products have their own benefits. If you are unsure of the right paving accessories for your needs, call our team. We have a friendly team of paving specialists that will help ensure you create the right paving for your needs.