Strong Heavy Duty Plastic Kitchen Plinth Clips Kick Board Clips with Attaching Bracket - Pack of 10 - Requires 2 x 3.5mm Diameter Countersunk Screws per Bracket - For Use From Installation Height of 80 mm - Manufactured in UK - Basics UK TM

Product Information

However, plastic replacements are cheap as chips online. But I'll still show you how they work. Separating Kitchen Plinth Clips Don't worry about being a couple of mms out as each clip slides a bit, giving you some leeway. Positioning the Clips On the Kitchen Plinth Once I finished screwing on my kitchen plinth fittings, I peeled off the blue protective film an attached to the base unit legs. Fitting Kitchen Plinth Corners I love simple jobs like these that instantly transform a space. If you wanted to, you could also fit some kitchen plinth lights. But with this being a utility space, we didn't feel they were necessary.

So, on every leg, I measured the height and also jogged down how far apart they were from each other.

Fitting Kitchen Plinth Corners

I placed masking tape roughly where I knew I'd need to cut. This helps my pencil marks more visible and prevents chipping. Elevate the aesthetics and functionality of your kitchen with our extensive collection of plinths and panels, the transformative elements that add the finishing touches to your kitchen and utility room. Beyond mere structural support, kitchen corner posts infuse character into your kitchen design. An oak plinth isn't just a base; it's a subtle yet impactful detail that brings warmth and richness to your kitchen's foundation. For this longer cut, I took it outside for some ventilation as it is an MDF wooden plinth. If you're not aware, MDF dust is very dangerous for the lungs. But, just a word of warning, they're plastic and not the most robust. If I could be bothered to buy metal ones, I would as I found these easily broke.

After my main kitchen cupboard plinth was in place, it gave me a new starting point for my last bit. This was so I could continue joining kitchen plinths together. Just search for ventilation grill for a kitchen plinth and you should be able to find some. Other DIY Kitchen Guides And also, with this cut being directly under the kitchen units, you shouldn't be able to see it. Another important thing to note is that my cut edge will not be sat directly on the floor with it being a timber plinth.It's been quite a few months since fitting kitchen plinths in our utility space. And to be honest, the only reason I've not shared it until now is that the end panel (above) needed correcting. In my case, I had lots of spare gloss white kitchen plinth leftover from when our kitchen was fitted a few years ago. I don't like throwing any wood away as you never know when it might come in handy! The reason for this is MDF is great at soaking up moisture and if I've had any spills, I've had it. If you're forced to use a cut edge for cost reasons, then I'd seal it with clear silicone as the last thing you want is a moist plinth. Preparing For Kitchen Plinth Clips