Creality 3D Ender-7 3D Printer

Product Information

If the build succeeds it is ready for you to upload to your printer. You will know if it was successfully built because it will show a SUCCESS in green at the bottom of the window in Visual Studio Code. Example of what a successful compile looks like. Your environment name may be different from what is shown above. config => The klipper config file in the klipper directory (this has the presets required for ender7 from make menuconfig)

The two biggest issues (and sources of frustration) I encountered, were (1) print adhesion and (2) bed leveling/distance of the print head to the bed. The Ender-7 also comes with various accessories in the box, including an 8gb micro-SD card, a micro-SD card to USB-A reader, a flush cutter, a scraper, and all the tools needed to assemble the machine. It also included half a kilogram of PLA filament, mine was the color white. Aiming to establish a "new speed benchmark" in the FDM field, the Ender-7 is the latest addition to the company's long-running Ender series, capable of printing at speeds of up to 250 millimeters per second.Each side of a triangle corresponds to only one corresponding angle and is unique. Therefore, the triangle is the most solid shape. Therefore, it is also the most mechanically stable. The extruder fan allows a more stable feed. High-speed material double fans are designed in a butterfly-shaped wing channel. Compared to a single fan, two fans increase the total air volume by 169%, providing rapid cooling for high-speed printing models. The good news is flipping the surface over is really easy to do. First, make sure the machine is off and the bed has cooled completely. Rotate open the two metal clips at the front corners of the bed and then wiggle the bed plate towards you until free. Flip the plate over and reverse the process to install it. For me, the glass surface solved all the adhesion issues. No reason to even try the other side again. Here’s a shot early on in a print where the adhesion was greatly improved. After adjusting temperatures and trying again this bunny (file included on the MicroSD card) was the one good print on that side of the bed.

I made use of mainsailos for my raspberry pi zero 2W, that already has all dependencies required to build the firmware as well Power off your printer and put the SD card into your printer’s SD slot. Turn the power on. This will cause the printer to flash the firmware from the SD card to your printer CPU. This may take up to 1 minute on some boards. With that out of the way, let’s talk about the specs. The Ender-7 is a filament based 3D printer from Creality. It has a build volume of 220 millimeters by 220 millimeters by 300 millimeters. It comes with a 0.4 millimeters nozzle, and uses 1.75 millimeters filament fed by a bowden extruder. PROPERTIES Build volume: 250 x 250 x 300 mm Feeder system: Bowden drive Print head: Single nozzle Nozzle size: 0.4 mm Max. hot end temperature: 260 ℃ Max. heated bed temperature: 100 ℃ Print bed material: Coated glass Frame: Aluminum Bed leveling: Manual Connectivity: SD card, USB cable Print recovery: Yes Filament sensor: Yes Camera: NoBase, rear motorized and side static uprights, top frame with print-head, spool mount, print bed (not shown above) First time using our firmware or having issues? Watch our video that is intended to clear up common mistakes people make when opening and using the firmware here: Unified 2 VSCode Tips for Noobs | EZTip #8 – YouTube A fully optimised slicing path dynamically adapts the motion acceleration and deceleration algorithm to effectively ensure the quality and efficiency of the printing process.