Autoglym Polar Wash, 2.5L - Snow Foam Car Shampoo Safe for Wheels, Paint & Trim

This really is dependent on several factors including the level of foam you would like to achieve, the settings of your pressure washer and the hardness of water in your area. Don’t forget to hose down your car for a final time when you’ve done all your soaping and rinsing, this will budge those last little bits of dirt and dust that gather in those hidden spots. Wheels Spray Polar Blast onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. Yes, apart from the front windscreen we would recommend Polar Seal can be used on all exterior surfaces. Stage 1: Polar Blast = Snowfoam. pH neutral, apply with pressure washer, leave to dwell for 5 mins or so, rinse off. This removes the loose dirt and helps soften dirt, some of which can then be removed with a high pressure rinse.Polar Blast can be used at various dilutions depending on the density of foam desired. A good starting point is 100ml product to 500ml water in your foaming bottle. Adjust foam gun settings as required to increase or reduce foam. Polar Wash is a safe and effective cleaner applied after using Polar Blast to remove excess dirt, traffic film and grime from your paintwork. The Autoglym Polar Kit contains 3 products used via a pressure washer to maintain & protect your vehicle. Spray Polar Seal onto the clean, wet vehicle, ensuring all exterior surfaces are covered, although avoid direct application to the windscreen. Start from the roof and work down! You don’t want to start with the wheels and then end up washing them again when the water from the top of your car has run down.

Other than application via snow foam lance, the product doesn’t really have anything to sing and dance about. That’s not to say that the product isn’t stand out in its performance, it just does such a good job of doing exactly what you want it to that frankly, it’s slightly boring. It’s not even scented! There is no benefit to building layers of Polar Seal. We would only recommend reapplication once water beading has ceased. We certainly do not recommend application more than once a month. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car. This is Autoglym's heavy duty pre-cleaner, and it doesn’t take much time with it to see why it already has an impressive reputation. In terms of ease of use and outright cleaning power alone, it's hard to choose between this and the pricier Bilt-Hamber's Touch-Less. The Polar Blast's greater dilution ratio offsets its smaller bottle, so you’ll get a good number of washes from it. It doesn’t smell too great, though, with a definite chemical aroma. For those of us that love nothing more than spending quality time giving our vehicles some TLC, you can’t go far wrong with taking some advice from the car cleaning pros at Autoglym. This isn’t just about a simple hose down. Whether it’s polishing, waxing or washing, discover how to do a thorough job with these top car cleaning and detailing tips. Cleaning your car exterior

\n\t\t\tAutoglym Polar Kit

Yes, it is a high foaming product that allows the user to see where they have agitated the product to minimise chances of ‘missing a bit’. However, although this product has greater cleaning power, its foam does not have the density and cling time of our pre-wash product - Polar Blast. Yes it can be used neat. However we would recommend a 50:50 dilution rate for the best results. It is up to the user to find a dilution the best works for them. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination. It is important that Polar Seal does not dry on to the surface of the vehicle. Once the car has been coated it should be rinsed immediately. Polar Seal is wax safe and we would recommend that if there is wax on the paintwork that Polar Seal is used as a top up. There is no need to remove the wax or other protection before applying Polar Seal.

Polar Seal is a durable hydrophobic coating. However, it does not offer the same long-term protection as Ultra High Definition Wax or Extra Gloss Protection. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels. Polar Blast is used as a pre wash snow foam and produces a highly dense foam blanket to your vehicle to help maximise cling time and loosen dirt.It’s easy to see snow foam as an alternative to shampoo and a replacement for traditional cleaning when it’s actually designed as a supplement. That’s not to say there are snow foams capable of washing a car, but it’s not the best course of action. What should I look for in a good snow foam? I’ve got a million things going on. Yes, I want the car to look less abandoned, but I’m pretty keen to keep what’s left of the paint protected. To do it justice will take hours, possibly days, which I simply don’t have. So I want something that is reasonably swift but also low input. The less sponging, the better. I’m hoping the multi-stage approach will limit the physical effort I have to put in. Lasting Results a>