Witter Towbars ZX202 Bolt-on Towball Mounted 2 Bikes Carrier,Black

Product Information

Secure the arm clamp onto the bike frame and fix the wheel in place by tightening the strap around the wheel once it is in the wheel mount Our three and four bike carriers are designed to carry a maximum load of 65 kg, which corresponds to 3 to 4 adult bikes.

Put the metal base plate under the crossbars and carriage bolts and screw the mounting bolts in using a spacer We tested the ZX504, as it seems perfect for the family MAMIL who takes mates to events. At 23kg, the Witter isn’t light but it does have wheels so you can roll it from garage to car before following the five-step setup, and it can carry up to 60kg. The ZX302 platform style cycle carrier from Witter takes up to two cycles of any size including a child’s. This cycle carrier is superbly designed to make operation and installation as simple as possible. But to ensure safety, and to avoid any damage to your vehicle or bikes, we're going to run through the installation procedure.You should load your heaviest bike first and alternate the way your bikes are facing as you load each one This is a platform bike carrier which has a tilting feature for easy access to the boot. With easy coupling and adjustable wheel holders, it is suitable for most towbars and can carry most bikes, including eBikes. Exceeding this load invalidates the warranty of the bike carrier, vehicle and the towbar. Any "clip" on accessories, e.g. pumps, bottles, bags etc. should be removed to reduce weight. This is a hanging bike carrier that fits to the towbar faceplate. It allows you to tow and carry bikes at the same time and is suitable for carrying eBikes. You can carry up to 3 bikes at a time and the weight of the bikes is fully supported by the towbar.

Use additional tension straps to secure bikes in place if this makes them feel more sturdy and ensure you have the correct tension on the straps to keep the bikes in place Step 6: Fit the protective cap onto one of the plugs, then attach the plug to the vehicle using the appropriate seven or 13 pin electrical connection. Ensure the plug is fully inserted and that the cable cannot touch the floor. Load the bike in 'dry' side up. This means the side with the chain, derailleurs and brakes should be facing upwards so no unnecessary pressure is placed on them

SOCIAL

Continue to load any additional bikes in alternating directions, leaving the lightest bike until last, and secure all bikes in place as detailed above

Step 5: Now its level, attach and tension the support straps. Then attach the other hooks to the tailgate or boot at a suitable point. Make sure this position is stable and strong enough to hold the weight of the carrier and cycles. Every platform bike carrier is different and will come with a specific set of instructions, so you should always follow these.So, whether you're on a family day out or a grand tour, this carrier is a great addition to your kit list. Additional Information Fixing to your towbar with a bolt-on mechanism, this cycle carrier has a low platform for easy loading as well as easy coupling that fits most towbars. It can be tilted forwards for easy access to the boot and has an adjustable wheel holder that holds most bike sizes, apart from eBikes. However, it is essential that the combined trailer nose weight and weight of the cycles does not exceed the maximum towball nose load, as specified by the vehicle manufacturer. Our towball-mounted Pure Instinct bike carrier is high quality and can be easily attached to your towbar with a clamp mechanism. It is available as a 2, 3 or 4 bike carrier and has foldable rails for when they are not in use. It can also be tilted for easy access to the boot but is not suitable for eBikes. Step 6: Attach the plug to the vehicle ensure the plug is fully inserted and that the cable cannot touch the floor.