Kreg Classic Face Clamp 76mm/3"

Product Information

The clamping faces are what set the face clamp apart from other forms of clamps as the clamping faces are very wide, ensuring the pressure is spread very thoroughly across the width of the workpiece. The width of the clamping faces also ensures that it can hold down large-sized workpieces relatively easy and can also be used to hold thin pieces in their grip. The clamps all provide up to 150 pounds of holding pressure. When used as spreaders, the 6-inch clamps extend up to 11-9/64 inches and the 12-inch clamps extend up to 17-21/64 inches. All of the clamps have a large, anti-skid gripping pad that won't mar the surface of the material being gripped. The Jaws: The jaws of the face clamp are long and curved pieces of metal that when brought together, form a C-shape. They have a stationary jaw, which remains fixed throughout the operation, and a moveable jaw, whose position can be adjusted. Clamps come in a wide range of sizes, allowing you to choose which best suits the size of the material you are clamping. There are a few numbers to consider when it comes to size: The location of the moveable jaw is controlled by the lever, so when the lever is pushed away from the handle the moveable jaw will move away from the fixed jaw, leading to the clamp being opened. However, when the lever is moved towards the handle, the moveable jaw also moves towards the stationary jaw and closes in on it.

Clamps - Appleby Woodturnings Kreg Pocket Hole Kits - Clamps - Appleby Woodturnings

Then you need to place the jaws of the clamp around the workpiece with the jaws on either side of the workpiece, so it is encompassed by the clamp. You then need to rotate the screw of the clamp to the right to bring the jaws together adjust the clamping pressure. If you want a versatile clamp that works for many different types of projects, is large enough to handle even sizable pieces, and has enough clamping power to keep your project firmly in place for as long as you need, then look no further than the BESSEY 36-Inch Clutch-Style Bar Clamp But if you just want to add a few lightweight bar clamps to your collection without spending a bundle, then the WORKPRO 6-Piece Bar Clamp Set is perfect for your needs. What to Look for in a Woodworking Clamp TypeThe Length: The length of the face clamp is variable and depends on the model of the clamp. But the length is measured as the distance from the edge of the jaw to the end of the handle. How To Use A Face Clamp.

What Is A Face Clamp? - Top Woodworking Advice What Is A Face Clamp? - Top Woodworking Advice

There are at least 30 different types of clamps to offer various methods of applying pressure. The design of the clamp determines its type, while the material, manufacturer, and warranty of the clamp will impact its cost. Face Clamp: These clamps are something like a pinch clamp, but with a square shape and wide pads that clamp securely without marring a delicate surface. They are useful for holding delicate pieces in place for gluing or drilling. No woodworking shop is complete without a wide assortment of clamps in different types and sizes. Just about any carpentry or woodworking project that goes beyond merely hammering a couple of boards together requires the use of a clamp. But while all clamps serve the same basic function—holding two or more pieces together temporarily—there are many different types of these handy tools available, each with a slightly different use or benefit. Below are some of the more common types of clamps you’ll want to consider adding to your workshop. The Jaw Opening: The jaw opening can easily be defined as how far away the moveable jaw can move from the fixed jaw. This opening space or width between the ends of the two jaws is known as the jaw opening and it determines the clamp’s capacity. If you only need lightweight clamps for occasional projects, then you'll appreciate what a bargain you get with the WORKPRO Woodworking Bar Clamp Set. There are six clamps in the set: four 6-inch clamps with a 2-3/8-inch throat and two 12-inch clamps with a 3-1/2-inch throat. All of the clamps have steel rails and heavy-duty reinforced nylon handles. Plus, all can convert into a spreader at the press of the red button.

Appleby Woodturnings Limited Units 3-4 Rinkway Business Park, Rink Drive Swadlincote, Derbyshire, DE11 8JL You will need to use at least two clamps for most projects, but the specific number of clamps to use will vary based on the size of what you're working on and the PSI required (largely based on the type of wood you're working on).

Trend Pocket Hole Jig Face Clamp Clamping Tool with Trend Pocket Hole Jig Face Clamp Clamping Tool with

Every woodworker's tool box should have a few of these clamps, which come in handy for holding all sorts of pieces together while glue or other adhesives dry. It is also perfect for holding metal pieces in place while being welded or drilled, or for general-purpose clamping. The large swivel pad helps reduce the risk of damage to the surface of the material being clamped. The jaw opening size, which is the maximum distance the jaws can separate. This determines how wide of an object the clamp can hold. Often, it's the same as the overall length, but not always. A face clamp is made up of several parts that enable it to secure workpieces tightly and without damage.

The Handle: The handle of the face clamp is a long piece of metal that the user holds on to while clamping the workpiece in place. The handle is sometimes covered with latex to increase the grip. The handle of the face clamp is also responsible for joining all the parts of the clamp together. The face clamp comes in different sizes for different levels of clamping and these sizes are judged by certain factors, including: Pinch Clamp: Also called a hand or spring clamp, these simple clamps are useful for holding delicate materials together.

Clamps | Woodworking Tools | Screwfix Clamps | Woodworking Tools | Screwfix

The clamp has sturdy, aluminum construction that is very durable. The T-handle is easy to adjust and the movable jaws hold your piece firmly in place from both sides. The clamp also has mounting holes so you can fasten it to your workbench to serve as a vise if desired. The Throat Depth: The throat depth of the face clamp is referred to as the distance from the ends of the jaws to the edge of the handle. The throat depth determines how large a workpiece can be clamped by that specific clamp. Some face clamps are designed with longer throats so they can accommodate larger workpieces. Bar Clamp: Also called an F-clamp, due to its shape, the bar clamp opens much wider than a C-clamp, allowing you to hold much larger workpieces together. There are bar clamps as small as 6 inches, but most woodworkers find that 24 to 36 inches is the most useful for large projects. The throat, which is the depth of the clamp, measuring from the frame of the clamp to the tip of its jaw. This measurement determines how far the clamp can reach into the material being held.

The Pressure Screw: When the jaws of the face clamp are closed, the screw can then be used to adjust the amount of pressure that is released by the jaws and onto the workpiece. The clamp has up to 100 pounds of clamping force, a maximum jaw opening of 6 inches, and a 2.43-inch throat. It's a great all-purpose clamp that you'll reach for over and over while working with wood or other materials. The clamp features a no-slip comfort grip, which improves your hold and protects against pinching. Both arm ends have oversized pads designed to spread out clamping pressure. We also supply 90° corner KHC-90DCC and the right angle KHC-RAC clamps.