Knipex PreciStrip16 Automatic Insulation Stripper 195 mm (self-service card/blister) 12 52 195 SB

Product Information

Po vložení kabelu do nástroje stačí stisknout uchopovací čelisti a v jednom kroku je kabel odizolován na nastavenou délku. Pro zajištění konstantní délky odizolování mají kleště od KNIPEX délkovou zarážku, na které můžete regulovat požadovanou délku. These tools are indicated when you need to remove the sheath of several bundled insulated cables. Again, there are different approaches that can be accomplished with the respective tools. Here too, the wide range of KNIPEX offers various options:

Mechanical wire strippers can usually be adjusted to a certain size using an adjusting screw, so that the two V-shaped cutting edges form a diameter that matches the cables to be processed. This is useful for work in which several cables with the same diameter need to be stripped one after the other, because in comparison to the conventional stripping knife, the procedure is carried out cleanly with only one hand after each setting. The wires are not injured if the setting is correct.KNIPEX nabízí také kombinované nástroje pro oba úkoly: Mnoho kleští pro odizolování kabelových plášťů má také integrované kabelové nože nebo boční nože, které umožňují čisté stříhání kabelů. Některé dokonce nabízejí integrovaný odstraňovač izolace.

Kabely lze podélně oříznout nejprve pomocí nástrojů, jako je například KNIPEX ErgoStrip®, a poté se odstraní. Alternativně může být plášť také oříznut kolem jeho obvodu a poté může být odstraněn dopředu. I had a wonderful T&E stripper made by Tavismanor of Colchester. Unfortunately when my tool wore out they had stopped making them and refused to make more. I bought a Jokari T&E stripper which is pretty good but not a match for the previous one. Perhaps Knipex will rise to that challenge?You don't have permission to access "http://www.homedepot.com/p/KNIPEX-PreciStrip16-Automatic-Wire-Stripper-6-28-AWG-12-52-195/318372826" on this server. Velmi speciálním kombinovaným nástrojem je KNIPEX ErgoStrip®, který lze použít k odizolování jak plášťů, tak izolací všech běžných typů vodičů.

One automatic stripper for easy and precise stripping of fine wires and rigid round cables with a cross-section of 0.08 to 16 mm². Large capacity range: simple, precise stripping and cutting of fine-stranded wires and solid round cables from 0.08 to 16 mm² The cables can be cut lengthways first using tools such as the KNIPEX ErgoStrip® and then stripped. Alternatively, the sheath can also be cut around its circumference and then be removed to the front. A very special combination tool is the KNIPEX ErgoStrip®, which can be used to strip both sheaths and insulation of all common types.

Tyto nástroje jsou vhodné, když potřebujete odstranit plášť několika svazků izolovaných kabelů. Opět existují různé přístupy, které lze pomocí příslušných nástrojů provést. KNIPEX i zde se nabízí různé možnosti:

Fine adjustable zero correction of the blade setting to special material requirements, e.g. due to large temperature differences With automatic wire strippers, the adjustment to the correct cable size is carried out automatically, which in addition to requiring little effort also saves you a lot of time. Self-adjusting wire strippers are particularly suitable if you are working with cables with different cross-sections. Excellent grip: thanks to semi-circular grooved metal holding clamps and accurate cutting via the parabolic stripping blade Precise blade settings to meet the specific requirements of insulating materials (e.g. large temperature differences).The KNIPEX PreciStrip16 has a huge range of applications: semi-circular grooved holding clamps ensure good grip and hold practically any insulation material securely in place.