DRAYTON WIRELESS SYSTEM DIGISTAT SCR

Product Information

The red 'Receive/Alarm' light on the SCR flashes periodically for around 5 seconds every five minutes or so (which means that the Digistat and SCR are communicating) and the green light is 'on'. This means that we should be getting heat. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Does Digistat work with combi-boilers and conventional boilers? Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. Green Premium is the Schneider Electric eco-mark that brings more value to our customers and more growth to our company.

Drayton Controls : Heating controls, TRVs and Digistat+ RF | Drayton Controls : Heating controls, TRVs and

In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode?Adjusted programmer & thermostat so that there was no heat demend, changed programmer time to come on in 5 minutes, turned Digistat up to 23C and waited. Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries.

Drayton Digistat + RF Wireless System - Drayton Controls

day programming: The most flexible option allowing you to schedule every day of the week independently. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat). Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you.The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body. When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. Depending on the fuel type you select during installation will affect how Digistat works with your boiler/heat source - so ensure to select the correct type during installation. Digistat supports the following fuel types: There may be other Digistats powered up and within range and this will slow down the pairing process. If it is possible to depower the other Digistat please do this while you are pairing, or if not then press “I have done these steps” and wait for the RETRY button to appear. On the second attempt the pop-up should appear instantly.

Drayton Digistat+3 RF Wireless Programmable Room Thermostat

This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. To shut the valve off permanently use the plastic decorator cap that comes supplied with the valve, the valve will remain shut no matter what the temperature. When a boost is selected, a timer symbol appears in the bottom right of the display and remains until the next event.The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units.