Paslode Impulse / Spit Pulsa Cleaner

Product Information

Cleaning helps to prevent dirt, debris, and other substances from clogging or damaging your nail gun. You can use a clean rag to wipe down the machine after every use. As for the air filter, it should be removed and cleaned after every two days if you are using the gun daily. Use the supplied aerosol to blast out any ingress and agitate with the supplied brush. Give it a good wipe out with the cloth too.` Step 5: once you’ve finished cleaning the chamber, use the supplied lubricant and apply a small amount around the chamber and the seals.

Nail Guns | Brad Nailer | Screwfix Nail Guns | Brad Nailer | Screwfix

Over time, a nail gun’s bolts and screws can come loose due to vibrations and heavy use. Loose parts can jeopardize the tool’s integrity. First thing fast, you should keep in mind that safety is paramount anytime you are oiling your nail gun. Before getting started, ensure to disconnect the nail gun from the power supply, i.e., like an air hose, and that the nail gun is empty. Carburetor degreaser doesn’t cost all that much and some claim it’s a brilliant alternative for Paslode nail guns (except when the nailer is super filthy). While holding the air hose connector in an upright position, add few drops of the recommended oil through the air inlet port and re-connect your machine to the air hose. Pull the trigger several times to help spread the oil throughout the machine. Most importantly, there’s no risk of damaging the nailer’s plastic, rubber,and electrical parts. ALSO READ: paslode nail gun repair manual

Your Basket

Having a nail gun or nailer is a smart investment, especially if you are into DIY construction or home improvement. For example, a brad nailer or a pin nailer will help you with lightweight projects around your home, whereas a flooring nailer will come in handy when installing a hardwood floor. This prevents you from spreading dirt or scratching the internal parts of your nail gun. Make sure you properly tighten all screws when reassembling your nail gun. Be sure to also apply oil to the air fitting each day (about 4-5 drops). Inside of the air fitting are O-rings, which should be lubricated using a finger. Step 6: turn your attention to the impeller blade on the motor. If this needs cleaned, again use the aerosol, brush and cloth.

Clean Hitachi Nailers – a Toolstop Guide - Toolstop How to Clean Hitachi Nailers – a Toolstop Guide - Toolstop

In a nutshell, using it as a Paslode nail gun oil substitute will be calling for trouble and more expenditure down the road unless you can, of course, prevent it from getting on the sensitive parts somehow. These products are strong enough to blast away oil, dirt, carbon deposits, and more from overly sensitive electrical equipment including pneumatic and cordless nail guns.

General Nail Gun Maintenance

When it comes to the motor, your attention should be on the impeller blade. Use, brush, aerosol, and a piece of cloth to clean the blade and to wipe out any leaked lubricant. #2. Clean and lubricate the feed system Paslode recommend that you use their official cleaner as, again, it’s specially formulated for their nailers. Other cleaners may chemically damage your nail gun’s electrical, plastic and rubber parts. They may also leave a residue which can cause damage to both you and your nailer. Use a clean, lint-free cloth.

Cleaner 12oz | Paslode Cordless Tool Cleaner 12oz | Paslode

After each use, wipe down the tool with a clean, soft rag. The air filter should also be removed and cleaned every few days if using the tool on a daily basis. If used occasionally, the filter should be cleaned after each use to keep out dust and debris. Spray the cylinder head assembly liberally and get rid of the gunk with lint-free cloth/ compressed air. It’s specially formulated to withstand the high temperatures generated by Paslode nail guns. Other lubricants can cause rapid build-up of combustion residue which will affect your nailer’s performance and require more frequent cleaning. It can also lead to premature parts failure and, in the worst case, an unrepairable nail gun. Use official Paslode degreaser cleaner. Something else: You’re advantaged when you use the recommended paslode cleaner and oil – it’s specially engineered for the tools and cleans wonderfully.

Paslode degreaser cleaner alternatives: What to stay away from

Hosing is what supplies the nail gun with the power it needs to run smoothly. The quality and state of the hose will affect the amount of pressure exerted. Now proceed to spray (and wipe the deposits) the main cylinder along with the piston driver assembly. The type of maintenance required will vary, depending on the type of nail gun. Pneumatic tools require a little extra maintenance than cordless or electric models. Maintenance for Pneumatic Nail Guns Because pneumatic nail guns are powered by an air compressor, they require a little more maintenance than their battery- and electric-powered counterparts. Proper lubrication will keep the tool running smoothly. If the nail gun will be used all day long, oil may need to be reapplied throughout the day.