BISSELL Stain Pro 6 | Carpet Cleaner With HeatWave Technology and 6 Rows Of Rotating Brushes | 20096

Product Information

This machine features a powerful suction motor and a deep-cleaning brush system that work together to remove stains and soil from carpet fibers. The StainPro 10 heats and then puts down a good – but not excessive – amount of fluid across its cleaning width. This procedure has to be repeated in 3-foot sections around the room while avoiding stepping on the damp carpet. With 12 rows of DirtLifter PowerBrushes, the ProHeat 2X Revolution Pro cleans deep down into the carpet fibres, leaving you carpets looking and smelling like new. If you would like to change your settings or withdraw consent at any time, the link to do so is in our privacy policy accessible from our home page.

The Bissell StainPro 6 has a motorized brush roll with six rows of bristles, allowing for thorough cleaning of embedded dirt and odors. If your carpets aren’t filthy, you could easily get away with half the recommended concentration and still achieve great results. To view the purposes they believe they have legitimate interest for, or to object to this data processing use the vendor list link below. Overall, the Bissell StainPro 6 is a capable and efficient carpet cleaner suitable for all types of carpets and upholstery. Out of the box, setup requires a screwdriver to secure the handle and another to secure the upper cable/hose carrier.

There is also a crevice tool, and this can help you to reach difficult corners in your home or car, providing greater versatility. The troubleshooting techniques discussed in this article are of great help to you that want to fix minor problems of the machine at home. For new carpets, the fibers and debris left behind during cleaning are more visible than in old and used carpets. However, in many cases, the machine may still fail to spray after the step above and may force you to further take the following actions.

Therefore, when dirt or tire marks, lines, or stripes are visible on the carpet after cleaning, the following troubleshooting steps have to be taken to fix the problem. The removable part of the hose is then disconnected from the machine and fitted to your chosen attachment. While standing farthest from the room’s entrance, adjust the Bissell Carpet Cleaner to the floor-cleaning mode. However, when this fails to work again, especially the spraying through the hose or the attachment to it, detach the tool and squeeze the trigger to check whether the solution comes out through the hose. The two-in-one water tank is filled with a suitable cleaning detergent according to the surface to be treated.The device can heat and maintain the water temperature in the tank at about 25 0C throughout the cleaning process. Bissell claim it has a fast drying time thanks to its full-width suction that will not leave your rugs too damp after cleaning. Richard has more than 20 years experience as a technology journalist, writing and editing on a vast number of publications. Of course, you also have the six rows of brushes to help agitate the carpets and bring up the dirt that was hiding from you.