Mapei 111 UltraColor Plus Silver Grey Grout 2kg

Product Information

Delivery charges vary for the following postcodes and will be delivered between 5-7 working days to the following postcodes: GY, HS, IM, IV41,IV30, IV42, IV44 – 49, IV55, IV56, JE, KA27 – 29, KW1 – 14, KW15 – 17, PA21 – 38, PA20, PA40+, PH9, PH15 – 20, PH32 – 44, PH49, PH50, TR21 – 25, ZE. Mapei Ultracolor Plus forms a smooth, compact finished surface with optimum resistance to abrasion, compression and flexural strength, and good resistance to acids with a pH > 3. Floors are ready for light foot traffic after approx. 3 hours. Surfaces grouted with Mapei Ultracolor Plus may be put into service after 24 hours. Basins and swimming pools may be filled up 48 hours after grouting. If you don’t have a colour preference, or hadn’t realised there were numerous options to choose from, the Mapei grout colour chart below can help you to visualise the different shades before you buy.

Spread Mapei Kerapoxy with an appropriate grout float, making sure the joints are completely filled. Use the same float, but on edge, to remove excess grout. Preparing the mix: While stirring, pour the Mapei Ultracolor Plus Grout powder into a clean, rust-free container containing 21-23% by weight of clean water. Mix the grout with a low-speed mixer to avoid air entrainment, until a smooth paste is obtained. Let the mix stand for 2-3 minutes, and stir again briefly before use. Use the mix within 20-25 minutes of its preparation. Always carry out preliminary tests before grouting stone or ground porcelain with a porous or rough surface. For those in search of a touch of glam, we even supply a selection of tile grout glitter additives in gold, silver, grey, pink and more. Perfect for giving tiled areas some added sparkle to bounce light around the room, this glitter can be added to your grout mix before you apply. Use the product at temperatures between +12°C and +30°C. However, at temperatures below +15°C application may be more difficult.Even if it already seems clean after passing over the surface with a rubber float, always clean the surface using a Scotch-Brite® pad and water, to emulsify traces of resin on the surface which could otherwise modify the final surface finish.

Acid-resistant bonding of tiles (used as an adhesive in compliance with class R2T specification according to EN 12004 standard). Mapei Ultracolor Plus Tile Grout is made up of a blend of special hydraulic binders, graded aggregates, special polymers, water repellent admixtures, organic molecules and pigments. Expansion and movement joints on walls and floors must never be filled with Mapei Ultracolor Plus. Use a suitable flexible sealant from the MAPEI range. Apply the grout: load grout mixture onto your grout float and generously apply it to the gaps between the tiles. Using diagonal and firm strokes across the tile joints, make sure you press the grout fully into the grooves so it’s filled to the top and evenly distributed. To ensure complete coverage, we’d suggest applying grout to small areas, working your way logically along.

Mapei Ultracolor Plus Silver Grey Flexible Grout (5kg)?

This is where tile grout comes into play, providing a hard and water-repelling barrier against dirt and moisture. Grouting is a key part of the tile installation process. Aesthetically, it provides a beautifully smooth result and adds the finishing touch to your tiling job. Practically, it means you can enjoy long-lasting tiles that perform as they should, rather than becoming damaged by dirt, debris and water over time. If you choose to skip the tile grouting process, it can impact the integrity of the tile adhesive, causing them to come loose and need replacing. Of course, with our Mapei grouts you aren’t limited to neutral hues, you can also use colourful shades in creative ways to make your tiles really pop out. From cool space blue and dreamy turquoise to sunny yellow and violet, embrace the beauty of bold grout colours to your heart’s content.

Mapei Kerapoxy Epoxy Tile Grout is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting. The following features are obtained when used correctly: Mapei Ultracolor Plus does not contain Portland cement and must not be mixed with gypsum or other hydraulic binders; never add water to the mix once it has started to set. Final cleaning of the powdery film of Mapei Ultracolor Plus from the surface may be carried out with a clean, dry cloth. From interior walls and floors to swimming pools, pathways, patios and even commercial areas, grout can be the thing that keeps your tiles looking better for longer. With DropEffect technology, and anti-mould properties thanks to state-of-the-art biotech technology, Mapei grout is suitable for tiling most areas of the home and beyond - including those that experience high volumes of foot traffic on a daily basis.Grouting of floor tile finishes in the foodstuffs industry (dairies, cheese factories, abattoirs, breweries, wineries, preserves factories, etc.), shops and environments where a high level of hygiene is required (ice-cream parlours, butchers shops, fishmongers, etc.). If the cleaning operation is carried out too soon (the mix is still too wet), some of the mix may be removed from the joints. If grouting is carried out in extremely hot, dry or windy weather, we After laying any tiles, you’ll need to choose the right tile grout to help you complete the job and seal your tiles from dirt and moisture - and this is where we can help, too. Mapei Ultracolor Plus is suitable for grouting walls and floors in areas that are subject to intense traffic, such as shopping centres, airports, restaurants and other public spaces. It is also suitable for residential use in all areas, such as facades, balconies, terraces and swimming pools. The colours available in this range are resistant to ultraviolet rays, too, so there’s also no concern about fading over time - and the Kerapoxy CQ also features coated quartz, making sure grout retains its original colour when cleaned.

Mapei Ultracolor Plus is available in 2kg and 5kg bags, in the following colours: Please note, only some colours are available in 2kg bags. Excellent workability, highly improved compared with traditional epoxy mortars thanks to its creamy consistency, which guarantees faster application times and makes it easier to clean the surfaces, with less waste and easier to obtain a good finish. Unglazed klinker tiles should be grouted with the same colour tone Kerapoxy. All other colours should be used only with glazed tiles. Bonding special pieces of tiles. Kerapoxy CQ may also be used to grout unglazed klinker, stone, polished porcelain or porcelain in contrasting colours. Always apply a small sample of the product in a trial area before using Kerapoxy CQ on wider surfaces. Grouting materials with an uneven surface where it would be difficult to apply and clean traditional epoxy mortar.After grouting with Mapei Kerapoxy, floors and walls should be cleaned immediately, before the product dries. Wet the surface thoroughly and emulsify with an abrasive pad for cleaning joints (such as Scotch-Brite or Kerakoll Cleaning Pads), making sure not to wash-out the joints. When cleaning walls, the cleaning pad should be fully soaked with water. The excess liquid can be removed with a hard cellulose sponge (e.g. Kerakoll Cellulose Sponge Float), and should be replaced when too full of resin. Use the same type of sponge for the final tooling of the grout. It is very important that once the finishing process has ended, no traces of Mapei Kerapoxy are left on the tile surface because it will be very difficult to remove. It is therefore necessary to frequently rinse the sponge with clean water during the cleaning process.When finishing large floor surface areas, use a rotary, disc-type power float with Scotch-Brite® abrasive pads, well saturated with water. All excess liquid can be removed with a rubber squeegee. The final cleaning cycle may be carried out using Mapei Ultracare Kerapoxy Cleaner for epoxy grout (special cleaning solution for epoxy grout). Mapei Kerapoxy Cleaner may also be used to remove thin residues of grout several hours after application. In such cases, the product must be left to react for longer (15-20 mins.). The efficiency of Mapei Kerapoxy Cleaner depends on the amount of resin residues and how much time has passed since application. Cleaning must always be carried out while “fresh” as described above. In areas that may need added protection against stains and chemicals, such as countertops or high-traffic areas, we’d recommend investing in the Mapei Kerapoxy or Mapei Kerapoxy CQ grout. Both tile grouts provide exceptional resistance to acids and boast stress-free cleanability, meaning you can keep your grout lines looking clean and colourful with ease. Applying the grout: Fill the joints with the Mapei Ultracolor Plus mix using a special MAPEI grout float or rubber squeegee, without leaving any gaps or steps. Remove any excess of Mapei Ultracolor Plus from the surface, by moving the float diagonally to the joints while the mix is still fresh. Speaking of grout colours, you’ll find our Mapei grouts come in a vibrant array of colours, helping you to find an option that suits your tiling project. Whether you want to colour match or contrast your tile grout against your chosen tiles, you’ll be spoilt for choice.