Joined in 2023 
82 
63 About this deal
These numbers tell you the maximum wattage that the transformer can carry. For example, a 40VA transformer can handle up to a 40-watt halogen light bulb, while a 10-60VA one can carry between 10 and 60 watts worth of bulbs. Some transformers might just carry one individual light bulb, while others might be able to carry several lower wattage light bulbs in a series.
If you’re replacing low voltage MR16 50W halogens that have low voltage 12V transformer, the first and obvious option is to replace it with something like an MR16LED. The retrofit lamps should work from your transformer. This can cause you to have to replace your transformer. Can I use 12V transformer for LED? Bulbs that operate on a lower voltage than 230-240V must be used with a compatible transformer when installing on UK mains circuits. The transformer converts mains voltage to a lower voltage suitable for the bulbs, ensuring they function as designed and preventing damage to the bulbs and/or light fittings. For example, if you have one 35W halogen installed in your kitchen, ensure you swap it for 35W equivalent LED. The actual wattage of the LED light bulb may vary, but the equivalent wattage must be the same as your current halogen bulbs. For example, you might find both 5W and 6W LED light bulbs that have an equivalent wattage of 35W; both of these would be fine to replace 35W halogen bulbs. The sale of higher energy bulbs was phased out in the UK in the last year. The sale of high energy fluorescent lightbulbs will be phased out by the government by September 23, 2023.
£3.47
LED (light-emitting diode) light bulbs are the most technologically advanced and energy-efficient bulbs available. They last many times longer than halogen light bulbs, produce the same amount of light, but use only a fraction of the energy. Most LED light bulbs can be used with existing light fittings (this is called retrofitting).
It’s important to note that the headlights are not the same as the ones in the picture. There are a number of advantages over halogens. They consume less power, do not heat up as much, and take up less space. According to XenonPro, you can’t just replace a bulb with an assembly. Can I replace halogen downlights with LED? The natural energy-saving properties of LED light bulbs means that they can offer the same brightness of a halogen equivalent, but using only a fraction of the power. A 5W LED spotlight, for example, can offer the same brightness of light as a 35W halogen spotlight. If you have low voltage halogen light bulbs installed with a transformer, the first thing you need to do before replacing Halogen MR16 light bulbs with MR16 LED bulbs is to find the transformer’s maximum load. You should be able to find this on the body of the transformer itself, in the form of a ‘VA’ number. This VA number will either be fixed, or it will be a range (e.g. 10-60VA). You would need a transformer to reduce the mains voltage down to 12 volts. There are two types of transformers available in the market. One is the electromagnetic transformer and the other is electronic. Electronic transformers are preferred due to their efficiency and low cost. #3 The compatibility FAQ about 12V transformer and light emitting device compatibility. The cost of efficiency and extra power consumption are explored in the FAQ article. The ‘LED drivers’ are designed for DC light. What is the difference between halogen and LED?
Write a review
The volt-ampere (VA) rating is the maximum load (in watts) that a transformer can safely carry. For example, a 40VA transformer can handle up to 40-watts of electrical equipment, while a 10-60VA one can carry between 10 and 60 watts worth. Installing low voltage LED light bulbs on a transformer designed for halogen lighting requires you to find the equivalent wattage ( see above) for the LED bulbs, so as not to overload the transformer. A term used to compare LED light bulbs with their incandescent alternatives. An LED light bulb with an equivalent wattage of 35W is a direct replacement for a 35W incandescent light bulb. This is different from a light bulb’s stated wattage ( see below).
Most people will be able to recover the cost of a new light bulb within three months. Less trips to the store and up the ladder can be saved with the use of LEDs. It takes about 25,000 hours for them to finish. By comparison, compact fluorescents can last up to 8,000 hours. Can you switch from halogen to LED headlights?These LED G4 light bulbs / lamps are ideal for use in a caravan, motor home, car, boat, home or business. Most light bulbs operate off mains voltage ( see below), but some light fittings are designed to be lower voltage. These are most commonly used in integrated kitchen fittings, where space is at a premium and smaller bulbs are a necessity. Low voltage light fittings often need a compatible transformer ( see below) to convert mains voltage to the correct, lower voltage. Most low voltage spotlights will be between 12-24 volts. The Halogen bulbs give off a fixed color temperature and consume more power than the LEDs. The lm per watt ratio for LEDs is 80 to 100lm/W, compared to 16 to 24lm/W for halogens. This means that the lights use less energy. Is it worth replacing halogen with LED? At this point, it’s important to note that if it is a halogen transformer,this maximum load applies to halogen light bulbs only. For example, if you have a 40VA transformer for halogen bulbs, you should not install 40-watts worth of LED light bulbs. This would overload the fitting and potentially cause a safety issue. In your outdoor lighting systems, you can often see halogen lighting. Flood light bulbs can be replaced with LEDs and last a long time. Can I replace 12V 50W halogen with LED?
Great Deal 
New Comment