Caution Oil Pipeline Below Warning Tape - 20 Metre Custom Cut Length

Product Information

The British Pipe Marking Standard requires that, at a minimum, pipe marking signs must be located on both sides of valves, service appliances, bulkheads, wall and floor penetrations, as well as any other place pipe contents identification is needed. These regulations are important to follow otherwise the marking will be invalid. Pipe marking is a vital part of reassuring the health and well being of workers around pipes carrying gases, liquids or other elements that could potentially cause harm. The color of the pipe marking is specific to the element the pipe is carrying, which informs workers of the danger. OILS: Oils, including fuels and hydraulic or transformer fluids, need to be labeled with a brown outer ring. Underground Warning Tape for marking buried services including underground cables and pipes - premium grade underground warning tape with ENATS 12-23 approval for cable and pipe marking.

domestic fuel supply pipes - OFTEC Home guide to domestic fuel supply pipes - OFTEC

Label Source supply a comprehensive selection of pipe marking and identification tapes, all of which are manufactured to BS1710 and BS4800standards with the recommended colour schemes and constructions. Where a fuel supply pipe passes through the wall of a building it should be run within a sleeve, such as a larger plastic pipe. Fuel supply pipes should not be run underground directly into the interior of a building, instead the pipe should rise externally to allow a remote acting fire valve to be fitted before it enters the building. Fire valves REFRIGERANTS: Refrigerants have several subcategories, including things like ammonia, and should be indicated by ochre rings (a yellow/maize color). The purpose of the labelled pipe is indicated by pipe marking tape. It is required by law to label any pipes carrying hazardous materials with the substance name and the appropriate colour code. All pipeline identification tapes are made of 90 micron self-adhesive vinyl with a rubber-based adhesive and a clear polypropylene surface laminate. Our pipe tape has an operating temperature range of -10°Cto +50°C. Home guide to domestic liquid fuel storage up to 3500 litres Home guide to domestic fuel supply pipes

What are the different pipe marking tapes available?Each pipe must be clearly identified using the correct pipe identification banding. Each tape is different depending on what is within the pipe, the most common are:

Warning Tapes - Production Equipment Underground Warning Tapes - Production Equipment

This has led OFTEC to join forces with colleagues across the heating industry to research a low carbon liquid fuel alternative to heating oil. The fuel, called HVO, can be used as a direct replacement and offers a near 90% reduction in emissions. For best performance, fuel supply pipework should take the most direct route between the fuel tank and burner, while avoiding high points in the pipework, the creation of trip hazards, or anything likely to damage the pipe and joints. Pipes should be supported by purpose made clips and attached to permanent structures, such as a wall. A garden shed or wooden boundary fence is not classed as a permanent structure because it will deteriorate with age and any movement may damage the pipe and fittings. Buried fuel supply pipesWhether you are already registered with OFTEC or simply want to find out a little more about what's involved with registering for OFTEC's Competent Persons, Microgeneration Certification, TrustMark or PAS 2030 schemes, you've come to the right place. An example of this could be elbows and connecting pieces (T-junctions), or junctions in which more than one pipe merges together (water used for multiple distinct purposes at one point may merge together in a large outflow pipe).